Μονάδες Ψύξης

Default

    View as: Grid List

    • Quick View

      Manufactured for “ceiling” installation into a hole on the cold room roof,  the KBS range is the ideal solution for those who want to make the most of  their available cold room space. Like the KBF range, these monoblocs  satisfy all storage requirements for fresh or ready-frozen produce in many food industry sectors, from restaurants to sales out-lets. The main  characteristics and optional extras highlight all of the qualities of the  range:

      • hermetic or semihermetic compressors
      • air or water condensing
      • valve or capillary pipe refrigerant expansion
      • defrost water evaporation using an evaporation basin with hot gas throw
      • electronic control for the refrigerating system
      • cold room lighting system
      • door microswitch on ali models, fitted as standard
      • door resistor connection cable
      • high pressure pressostat with fixed setting and manual reset
      • low pressure pressostat with fìxed setting
      • housing resistor
    • Quick View

      INCOLD, a leader in the refrigeration field, is pleased to propose a new  range of UNIBLOCKS called “ TP “ able to suit the most varied  requirements from the international market . Thanks to their manufacture  procedure and siting in the room , these units are to be considered as an  improvement of COMMERCIAL production , which has already gained us  the praise of a vast clientele all over the world. Notably compactness is  one of the main features of “ TP “ units , which are sited in the left-hand  corner of the room and quite fully built-in, thus allowing full use to all the  inside and outside volume of the room .  “ TP “ units are manufactured in models subdivided, according with room  temperature required , into:

      • “M” Medium temperature +10°C to -5°C R404A
      • “B” Low temperature   -15°C to -25°C  R404A

      “ TP “ units are manufactured according to production standards, using  top quality materials. Hot gas defrost is used in medium and low  temperature models. All models incorporate a condensate evaporation  system within the unit, avoiding the inconvenience of permanent external  escape pipes. All units are provided with an advanced electronic control  panel able to carry out 38 functions, all preset at factory.

    • Quick View

      The BLOCKSYSTEM is a refrigerating set that consists of one condensing unit, one  evaporator and one control panel. This solution enables to have a product easy tobe  installed, with compact overall dimensions and reduced maintenance costs.  All Blocksystems are equipped as follows:

      • self-bearing housing made of galvanized sheet which is coated with epoxy powder;

      • panels easy to be removed that guarantee an easy access to the components in case  of inspection or maintenance;

      • hermetic or semi-hermetic compressors with motor thermic protection;

      • electronic control board that can be programmed according to different user  requirements;

      • control panel installed in a remote position;

      • heat exchangers with copper and aluminium blocks;

      • condensation by air (optional by water);  • gas expansion by capillary tube or thermostatic valve;

      • ventilation or heater automatic defrosting with programmable run duration and  frequency;

      • direct condensing water discharge.

      • additional electronic module for master/slave operation (optional);

      • additional electronic module for monitoring, recording and remote management  (optional);

      • remote management system (optional).

      The quality of the components used, the care of the assembling process and the  severe tests guarantee a product of great reliability and safety.  In these machines the condensing unit, which is to be installed on the external side of  the cold room walls, is separated from the evaporator, to be installed internally.  This enables the two items to be installed a certain distance from each other. This  solution grants an easy and fast installation both on the floor and on the roof.  This range is available in two different versions: nitrogencharged with shut-off valve  connections for all models or, where available, pre charge refrigerant and fast  connections (ST/R). In this case it is possible to request the supply of pre-charged  connection pipes (for additional details see the optional table related to each model).  Ceiling mounted evaporator. Thermostatic valve or capillary expansion. Heater or  ventilation defrosting.  ST models are equipped with remote control panel (10m long cable).

    • Quick View

      Functional and practical, this range is the most essential of  keyblock’s products. These monoblocs for cold rooms are  manufactured for the storage of fresh and ready-frozen products  in small and medium-sized concerns. They are installed to cross  over the cold room wall. The main characteristics and optional  extras are as follows:

      • hermetic compressors
      • air or water condensing
      • valve or capillary pipe refrigerant expansion
      • defrost water evaporation using an evaporation basin with hot  gas throw
      • electronic control for the refrigerating system
      • cold room lighting system
      • door resistor connection cable
      • high pressure pressostat with fjxed setting and manual reset

    Η ιστοσελίδα μας frost-it.gr χρησιμοποιεί cookies. Προχωρώντας στο περιεχόμενο, συναινείτε με την αποδοχή τους. Περισσότερες πληροφορίες

    The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

    Close